The works completed by LLC "TRM Technoremmontage" on the following objects with indicating manufacturers and models of equipment, which the specialists of LLC "TRM Technoremmontage" have experience in installation and repair

 

2019

CJSC «Ladozhskiy DSK»Leningrad region, Avrovo.

  • Installation of Minda Industrieanlagen GmbHtechnological equipment and metal structures and beams of TimberPress X 337CLT panels production line.
  • Complex of works of mechanical, electrical, pneumatical installation and tests of 7 KATRЕSdrying chambers KAD 1x12PV.

NPJSC "SVEZAUst’-Izhora", Saint Petersburg

  • Mechanical and electrical installation of plywood infeed and outfeed conveyors to the CrossWrap plywood packing line with cables and electrical products supply

LLC «UPM-Kymmene Chudovo», Chudovo, Novgorod region.

  • Valon Kone VK32SX debarker rotor disassembly, packing and preparation to transportation
  • Additional safety system of Schelling plywood cutting line installation in terms of SAMI project.
  • Production and installation of platforms with ladders for service of spark extinguishing system in plywood mill.
  • Production and installation of two service platforms inside the heat recuperation chamber of veneer mill in terms of CIP project.
  • Production and installation of water pipe system between glue kitchens in plywood shop.
  • Installation of additional fan at pneumatic dust system to the new boiler in terms of CIP project.
  • Complex of works for reconstruction of Schelling plywood cutting line
  • Equipment general maintenance works at:

-          Plywood mill

-          Timber hydro-thermal processing preparation pools

-          Veneer mill

-          Heat and power department

NPJSC «SVEZA Novator»Novator, Vologda region.

  • Raute (Finland) 3VKKT based veneer peeling line №4 modernization
  • Cross Wrap (Finland) packing line installation

LLC «UPM-Kymmene Chudovo», Chudovo, Novgorod region.

  • Production, supply and installation of cyclone for wood dust pneumatic system from MOLDOW MHL (Denmark) filter
  • Assistance to RAUTE specialists in installation, maintenance, commissioning and start-up of equipment in terms of CIP project:

- peeling line

- drying line

- 8 ft combi-composer

- veneer patching line

- hot press

- laminated plywood press

  • NIPEMA OY(Finland) plywood impregnation line exhaust system production, supply and installation
  • Production and installation of 2 platforms with ladders for service of aspiration system in plywood mill.
  • Installation of Raute (Finland) combi-composing line №5.
  • Wood dust transportation system replacement to the new boiler.
  • Plywood mill`s air cleaning system modernization.
  • Production, supply and installation of equipment for exhaust of air from Raute (Finland) hot press, laminated plywood press and lay-up line.
  • Production, supply and installation of aspiration system from MOLDOW (Дания) air filter to veneer mill equipment

2018

JSC «KNAUFPetroboard», Kommunar, Leningrad region.

  • Cardboard`s machine №2 electrical disassembly and new equipment installation

LLC «UPM-Kymmene Chudovo», Chudovo, Novgorod region

  • Equipment general maintenance works at:

-          Plywood mill

-          Timber hydro-thermal processing preparation pools

-          Veneer mill

 

 

  • Production and installation of racks for material warehouse
  • Production and installation of ramp for loading of goods wagons
  • Disassembly of glue kitchen equipment in plywood mill.
  • Disassembly of laminated veneer press and service platforms.
  • Equipment acceptance, unloading, warehousing, pre-installation inspection and repair of wood waste materials transportation system with total length of 640 meters
  • Production and installation of waste materials removing system from RAUTE composing line equipment.
  • Plywood hot press outfeed roll conveyor modernization.
  • Complex of works for replacement of soft cover warehouse with square of 252 sq.m.
  • Installation of soft cover warehouse with square of 1925 sq.m.
  • Installation of canopy to soft cover warehouse
  • Installation of Raute (Finland) combi-composing line №4.
  • Installation and tests of Caribu (Finland) dryer recuperation system

 

 

2017

 

LLC "UPM-Kymmene Chudovo", Chudovo, Novgorod region

 

  - Planned preventive maintenance of the workshop on the production of thin veneer.
  - Installation of two MaNiTek Oy (Finland) automated feeding line for Raute (Finland) hot presses
  - Planned preventive maintenance of the workshop on the plywood production.
  - Timber hydro-thermal processing preparation reservoirs repair works.
  - Repair works of local treatment facilities reservoir metal cover.
  - Repair works of fuel supply equipment to the boiler house.
  - Repair works of metal structures of waste materials transporters in plywood production shop.
  - Manufacturing and installation of racks in materials storage.
  - Repair works at Hekotek logs sorting line.

 

LLC «Territoriya» vil. Verkhnee Cherkasovo, Vyborgskiy district, Leningrad region

    The complex of works of manufacturing and installation of sawn timber open canopy storage with area of 630 sq. meters.

 

Sudoma sawmill LTD, Pskov Region, Dedovichi District, Dedovichi, Bundzena str.

-   Installation of thermo oil piping system thermo isolation from oil facility to heat treatment autoclaves with materials supply

-   Manufacturing and installation of heat treatment autoclave vapor removal piping system with materials supply

-   Manufacturing and installation of smoke piping at thermo oil facility

-   Condensate removal from heat treatment autoclave system piping installation

 

LLC"UPM-Kymmene Chudovo", Chudovo, Novgorod region

-   Complex of works of manufacturing and installation of soundproofing boards for aspiration system and wood waste removal system at production shop roof.

-   Manufacturing and installation of protective metal buffers and metal structures at plywood packing line

 

2016

 

LLC"UPM-Kymmene Chudovo", Chudovo, Novgorod region

-   Installation of soft cover warehouse with an area of 252 m2

-   Plywood transportation system modernization

-   Waste materials press installation.

-   «Hekotek» (Estonia) log sorting line installation

-   «Nordfab» air system to production shop installation

-   Installation of plywood grinding line «IMEAS» (Italy) with aspiration system.

-   Disassembling of plywood grinding line «Steinemann» (Switzerland).

-   Disassembling of laminated plywood sorting line «Har-Ko Оу» (Finland).

-   Reconstruction of MaNiTek Oy (Finland) technological equipment for plywood repair

-   Timber hydro-thermal area overpass repair works with supply of the materials.

-   Truck scales installation.

-   Planned preventive maintenance workshop on the production of plywood and peeled veneer.

-   Timber hydro-thermal processing preparation pools repair.

 

LLC «Territoriya» vil. Verkhnee Cherkasovo, Vyborgskiy district, Leningrad region.

- The complex of works of installation of 1200 square meters soft cover warehouse.

- Manufacturing and installation of rainwater drain pipeline from Muelboeck drying chamber.

- Manufacturing and installation of service platforms in Muelboeck drying chamber technical room.

- Manufacturing and installation of bumpers in drying chambers.

- The complex of works of manufacturing and installation of overground heating network unit pipeline from boiler shop to Muelboeck drying chamber technical room.

- The complex of works of manufacturing and installation of heating networks inside the technical room of Muelboeck drying chamber.

- Installation and verification tests of Muelboeck lumber drying chamber technological equipment.

 

2015

 

LLC «Territoriya» vil. Verkhnee Cherkasovo, Vyborgskiy district, Leningrad region.

- Installation and verification tests of Muelboeck lumber drying chamber technological equipment.

 

Sudoma sawmill LTD, Pskov Region, Dedovichi District, Dedovichi, Bundzena str.

Installation of technological equipment in the heat treatment shop and lumber vacuum impregnation by Metallerie du Sud Lorrain (France):

-          Installation of 3 autoclaves for heat treatment

-          Impregnation autoclave installation

-          Cooler installation

-          Heat treatment autoclave water supply system installation

-          Autoclaves loading and unloading system installation

-          800 kWthermal oil systeminstallation

-          Piping: thermal oil, water supply to the autoclave, the condensate from the autoclave heat treatment, deducing from the water supply piping systems

 

LLC"UPM-Kymmene Chudovo", Chudovo, Novgorod region

Installation of metal frames of two warehouses with an area of 1250 m2 and 900 m2, production by BEST-HALL, Finland.

Stretch tent covering on collected skeletons of warehouses.

Installation of air handling units in the warehouse area of 1250 m2.

Planned preventive maintenance workshop on the production of plywood:

- Debarking machine;

- Saws;

- The roll table;

- Conveyor of material supply into the workshop.

- Chain conveyors;

- The roll table in the shop;

- The conveyor after saws and manipulator;

- Repair peeling line №2 + modernization of the peeling line №.2;

- Repair of cracked lines №.1, 3;

- Veneer drying line №.1, 2, 3;

- Veneer sorting line №.1, 2, 3;

- Belt conveyors repair;

- Crusher spiral and pencils, sorting of chips;

- MOLDOW aspiration system filter repair, bunkers repair;

- Lay-up line;

- Glue preparation division;

- Warehouse of resins;

- Removing and reinstalling after cleaning, the adhesive and wash water pipeline;

- Repair of roll conveyors #3 and #4;

- Wastes exhausts fans;

- Laminating press №2 repair;

- Timber hydro-thermal processing preparation pools repair;

- Hydro-thermal processing trestle area repair

 

Prysmian Group Russia, CJSC "NevaCable", St. Petersburg

The complex of works on disassembling, labeling and packaging mechanical, hydraulic, pneumatic, and electrical parts of technological equipment lines:

- Cable twisting line F5;

- Buffer line;

- Quad LESMOcable twisting line;

- Cable sheath line №1 and №2;

- Cable isolation line #3;

- Cable isolation line #4

- Kevlar line;

- Breaking machine.

 

Sudoma sawmill LTD, Pskov Region, Dedovichi District, Dedovichi, Bundzena str.

The complex of works of installation and validation testing of 14 chamber drying process equipment for lumber by Katres, Czech Republic: mechanics, hydraulics, pneumatics, electrical, instrumentation and automation parts. The complex of works of designing, manufacturing and assembling with customer's materials service platforms for technological equipment in the woodworking shop, rooms for scanner logs in the sawmill.

 

LLC"Biotop", Russia, Pskov region, Porkhovsky district, Tosnyborki, plant manufacturing wood pellets

- The demolition of the existing building in the area of the heat generator FT-4;

- Erection of frame buildings in the area of the heat source;

- Installation of wall panels of the structure to the heat source;

- Installation of roof structures for a heat source;

- Concrete works under the heat exchanger and for fuel supply;

- Dismantling, transferring and mounting of the existing storage of raw materials;

- Installation of the fuel delivery system to the heat generator;

- Installation of the heat generator FT-4;

- Installation of feeding conveyor into the hammer crusher with silo;

- Installation of hammer crusher;

- Installation of hammer crusher pneumatic exhaust system;

- Raw materials feeding system to the drying drum modernization (installation of sluice gates);

- Installation of electrical parts;

- Restore of the insulation of the drying drum.

 

 

LLC "UPM-Kymmene Chudovo", Chudovo, Novgorod region

- Frommia (Germany) plywood trimming line disassembling

- Homag (Germany) laminated plywood trim cutting line installation. The line was restored and adopted for “UPM-Kymmene Chudovo” by MaNiTek Oy (Finland);

- Iinstallation of nine sections of the Dantherm Filtration (Denmark)bag filter;

- Installation of air ducts (2 strands, Ø 600mm, L250 m) from the grinding line to the filter;

- Installation of air ducts (800x800 mm, L– 250 m) clean air supply system to the shop;

- Installation of wood dust pneumatic system (Ø250 mm, L – 310 m) from the filter to the hopper drive.

 

2014

LLC "UPM-Kymmene Chudovo", Chudovo, Novgorod region

- Troubleshooting, repair, installation (mechanics, electrics, electronics) of Dantherm Filtration (Denmark) aspiration systems from the plywood sanding line Steinemann (Switzerland).

- Dantherm Filtrationnine-section bag filter installation.

Installation of air ducts (2 strands, Ø 600 mm, L 250 m) from the grinding line to the filter.

- Installation of air ducts (2 strands, Ø 600mm, L250 m) from the grinding line to the filter;

- Installation of air ducts (800x800 mm, L– 250 m) clean air supply system to the shop;

- Installation of wood dust pneumatic system (Ø250 mm, L – 310 m) from the filter to the hopper drive.

 

Prysmian Group Russia, CJSC Neva Cable, Saint-Petersburg

- Deconstruction and installation of 630 LESMO DT (Italy) cable twisting line (mechanics, electrics and electronics);

- Manufacturing and installation of metal racks for optical fiber cable reels.

 

" LLC "SVELEN" Saint-Petersburg, Kolpino, Izhorsky plant

- Disassembling of P350P2 350 kVA (280kW) diesel power, with shutdown of manipulator control panel and the Redoma (Sweden) crushing line;

- Disassembling and installation of diesel generator БКАЭС 1 хР 1000, ЩС-5 (crusher and manipulator), the ЩУ (Redoma), ЩС (turbo rotor) connection;

           

LLC "UPM-Kymmene Chudovo", Chudovo, Novgorod region

Execution of planned preventive repair works of the technological equipment in the peeled veneer workshop:

- Ramp for log pencils;

- Rotary shear 3500RC – 2 ea.;

- Mesh veneer dryer 3VMS3600-9-0;

- Peeling machine VE800x3350cTSU;

- Log buffer keeping machine PVV800x3300;

- Chipping machine TR1300;

- Debarking machineVK32S;

- The roll table TSK5-75x4,2, and chain saw STICHLES 121.

- The transport system of the shop.

Execution of planned preventive repairs of process equipment in the production of plywood:

- The roll table and feeding conveyor to the workshop;

- Manipulator;

- Oscillating feeding conveyor to the debarking machine;

- Debarking machine VK;

- Pendulum saw No. 1 and No.2;

- Peeling line No.1, No. 2 and No.3 Raute logs pushers and holders;

- MOLDOW dust filter;

- Peeling and stacking lines No.1, 2, 3 Raute;

- Veneer drying and sorting lines No.1, 2, 3 Raute;

- Adhesive preparation, resins warehouse, Plytec lay-up line;

- Prepressing cold presses No.1 and 2 Raute;

- The transport system of the shop.

- The installation of chipper Heinola 910RSV produced by Heinolan Sahakoneet OY (Finland) in structure of: chipper, belt conveyor, screw conveyor;

- Reconstruction of the existing transport system for chipper Heinola 910RSV. Logs hydrothermal treatment pools repair works.

 

Prysmian Group Russia, CJSC Neva Cable, Saint-Petersburg

- Cabling of the equipment, tools and devices, equipment startup, SETIC and LESMO (Italy) QUADRO cable twisting line adjustment;

 

LLC "SVELEN" Saint-Petersburg, Kolpino, Izhorsky plant

- Work on setting up modal container receiver to cable reeling and packing line BONGARD KW-3058 (Germany) with drawing production line for copper wire with annealing LH45/103 (China).

Prysmian Group Russia, CJSC Neva Cable, Saint-Petersburg

- Mechanical and electrical disassembling/assembling of twisting line No.5 for optical modules;

 

The works completed by LLC "TRM Technoremmontage" on the following objects with indicating manufacturers and models of equipment, which the specialists of LLC "TRM Technoremmontage" have experience in installation and repair as subcontractors.

 

2013

LLC "SVELEN" Saint-Petersburg, Kolpino, Izhorsky plant

- The installation and start-up (mechanical, electrical, pneumatics and hydraulics) of the BONGARD KW-3058 (Germany) container receiver for cable reeling and packaging;

 

Prysmian Group Russia, CJSC Neva Cable, Saint-Petersburg

- Mechanical and electrical installation of climate chamber model 24 UC – 60/150 project OFC-OPGW;

- Revision and repair of breaking machine with the connection to the control panel;

- Installation and start-up in the mechanical and electrical parts (except for the eyeliner power to the control cabinets) of OFC – OPGW project Kevlar line;

- Repairs of metal racks for coils of optical fiber cable;

- Manufacturing and installation of fencing around the testing machine;

- Works on manufacturing and installation of fencing for the OPGW cable line.

 

LLC "UPM-Kymmene Chudovo", Chudovo, Novgorod region

- Execution of scheduled preventive repair works of process equipment in plants producing plywood and peeled veneer.

 

 

The works completed by LLC "TRM Technoremmontage" specialists on the following objects as the participants of different companies

 

2013

LLC Swedwood Tikhvin, Tikhvin, Leningrad region

- Installation works of technological line for drying sawdust wood pellet production.

- Installation of foundation, the bunker for wet sawdust, the walls and roof of the hopper, foundations for the pusher, pouring devices, of pits for the follower, base plates and bin technical building, installation of technical building.

- Installation of heating mains and connect it to a drying installation.

- The incut of technological water piping to outer network and its connection to the drying equipment.

- The installation of drainage and treatment facilities, transfer of storm water drain, connecting sewer to the drying equipment.

- Laying of power and fiber-optic cable networks, installation of electrical equipment by connecting them to a drying installation, the lightning protection device.

- The incut and laying of the main and backup air pipe lines connected to a drying installation.

- Automatic fire-extinguishing installations.

- Installation of technological equipment: Stella dryer, Saxlund feed system and transport the wet sawdust, of a pneumatic conveying system, Scheuchcyclone and pouring devices.

- The installation of technical facilities protective constructions and fencing of the drying unit.

 

2012

LLC "UPM-Kymmene Chudovo", Chudovo, Novgorod region

- Repair, manufacturing and installation of equipment and metal structures for glue preparation line;

- Execution of planned preventive repairs of process equipment in plants for the production of plywood and veneer sheets.

 

LLC "Sheksna mill wood stoves" in Vologda region, village Sheksna

Modernization of fiberboard production line: the scope of work includes the disassembling of outdated equipment (including construction) and installation of fiberboard equipment lines and TMA hydraulic press. The equipment of the Dieffenbacher company.

 

LLC "UPM-Kymmene Pestovo", Pestovo, Novgorod region

Execution of scheduled preventive repair of the technological equipment of the sawmill.

 

2011

 

LLC "MTR "Expert"

"Wood production (Furniture factory Mekran) Krasnoyarsk

- Installation of Mohringer equipment of sawmill complex;

- Installation of Bürkle equipment for pressing and finishing company;

- Installation of Weinig equipment for production of glued massive shield;

- Installation of Kaeser systems of preparation of compressed air;

- Installation of Kuper lines for veneer processing;

- Installation of Nestro equipment for air purification;

- Installation of Heesemann grinding equipment;

 

G. p. Dubrovka, Leningrad region, LLC "Zavod Nevsky Laminat"

- The complex of works of chipboard press foundation reconstruction.

 

LLC "UPM-Kymmene Chudovo", Chudovo, Novgorod region

- Execution of planned preventive repairs of process equipment in plants for the production of plywood and veneer sheets.

 

2010

Closed joint stock company "North-West holding" in Podporozhie, Leningrad region

- Raw materials preparation line for wood fuel pellets installation;

- Manufacturing of service platforms.

- Installation of boiler equipment for producing wood fuel pellets from sawmill wastes and wood.

 

LLC "UPM-Kymmene Chudovo", Chudovo, Novgorod region

- Execution of planned preventive repairs of process equipment in plants for the production of plywood and veneer sheets;

 

2009

The limited liability company "Modern technologies of wood processing"

 

Torzhok woodworking plant "Talion Terra"

- Disassembling and installation of process equipment of drying drums download site during the reconstruction of plant of wood fuel pellets production;

- Installation of lighting equipment and regrinding raw chips site lighting cables;

- Installation of grounding lightning protection.

LLC "UPM-Kymmene Chudovo", Chudovo, Novgorod region

- Execution of planned preventive repairs of process equipment in plants for the production of plywood and veneer sheets;

Installation and modernization of two Raute laser central loading devices.

 

JSC "Manturovo Plywood Mill", Manturovo, Kostroma region

- Manufacturing and installation of service platforms for Raute bucking technological equipment;

- Installation of conveyors of the waste removal for the raw materials bucking line;

- Manufacturing and installation of the pivot device for the raw materials bucking line;

- Works on installation and commissioning in mechanical, pneumatics, hydraulics, electrics and electronics of the technological equipment of the Raute company lines:

- Installation of logs cutting line;

- Peeling line, felling line and stacking line installation.

 

JSC "Veliky Ustyug plywood mill "Novator", Velikiy Ustyug, Vologda region

Installation and adjustment of technological equipment of the Raute company lines:

- drying and sorting;

- splicing of veneer;

- pressing;

- large-format plywood laminating.

 

2008

 

LLC "UPM-Kymmene Chudovo", Chudovo, Novgorod region

- Execution of planned preventive repairs of process equipment in plants for the production of plywood and veneer sheets;

 

LLC "Vyatskiy plywood mill", Novovyatskiy district, Kirov

The complex of works on installation and adjustment of Raute technological equipment for production large-format plywood capacity of 90.0 thousand cubic meters per year, consisting of:

- Manufacturing and installation of service platforms for technological equipment;

- Complex of works on installation and commissioning of complete "NESTRO" filters system with air return to the shop (AC-5), briquetting area bunker with filter;

- Complex of works on manufacturing and installation of exhaust hoods over the three presses at the company on manufacture large veneers.

 

JSC "Veliky Ustyug plywood mill "Novator", Velikiy Ustyug, Vologda region

Installation and adjustment of technological equipment of the Raute company lines:

- drying and sorting;

- splicing of veneer;

- pressing;

- large-format plywood laminating.

JSC "Manturovo Plywood Mill", Manturovo, Kostroma region

- Works on installation and commissioning in mechanical, pneumatics, hydraulics, electrics and electronics of the technological equipment of the Raute company lines:

- Installation of logs cutting line;

- Peeling line, felling line and stacking line installation.

- Manufacturing and installation of service platforms for technological equipment.

 

2007

LLC "UPM-Kymmene Chudovo", Chudovo, Novgorod region

- Repair works of windows pneumatic openers;

- Commissioning of automated systems (APCS) of Raute equipment, peeling line and veneer drying line;

- Installation and reconstruction of Shelling format-edged technological equipment;

 

LLC "Modern technologies of wood processing", Torzhok, Tver region

- Commissioning and elimination of structural errors of the technological equipment of the plant for the production of fuel pellets;

- Installation of aspiration system of presses for the production of fuel pellets.

 

JSC “Kaluga plywood plant”, Kaluga

- Installation of a Raute 2HV-66 peeling line and laser central loading devices;

- Fabrication of a building berth for installation of 2HV-66 peeling line and laser central loading devices;

- Disassembling of LU 17-4 peeling line produced by JSC "Proletarskaya Svoboda".

 

LLC "Vyatskiy plywood mill", Novovyatskiy district, Kirov

- Installation and adjustment of Raute technological equipment for large-format plywood production;

- Manufacturing and installation of service platforms for technological equipment.

 

2006

 

LLC "Sotameko plus", Sokol, Vologda region

- Inspection of technological equipment in terms of mechanics, hydraulics, pneumatics and electrics for further troubleshooting.

 

CJSC "Cherepovets plywood-furniture combinat", Cherepovets, Vologda region

- Work on integrated commissioning of Proletarskaya Svoboda technological equipment (СРГ–25 drying chamber and the heat generator TG-2);

 

LLC "Jarkowsky DOK", Jarkowski village, Tver region

- Preparatory work for the disassembling of LU 17-10 and central loading device with manufacturing of a building berth;

- Disassembling of LU 17-10 peeling line and CLD with stacking line and log hoarder conveyor;

- Installation of LU 17-10 and central loading device.

LLC "Sotameko plus" Sokol, Vologda region

- Repair and adjustment of Raute 2HV peeling line in mechanical, electrical and electronics parts, pneumatics and hydraulics, transportation line, veneer cuttings and stacking line;

- Installation of mechanical, hydraulic and pneumatic parts of P-714Б press (produced by "Volev" Ukraine).

 

The company "UPM-Kymmene Wood Oy", Kuopio, Finland

Raute peeling and drying lines disassembling, marking, packing and loading to customer's transport

 

LLC "UPM-Kymmene Chudovo", Chudovo, Novgorod region

- Installation and adjustment of technological equipment of Raute drying and peeling lines;

- Installation of edge gluing line process equipment;

- Manufacturing and installation of dryer cold section #3 extractor;

- Manufacturing and installation of service platforms for drying and peeling lines.

 

LLC "Modern technologies of wood processing", Torzhok, Tver region

- Installation of technological equipment of the plant for the production of fuel pellets;

- Manufacturing, installation of steel structures and service platforms for technological equipment of the plant for the production of fuel pellets.

 

2005

 

JSC "Severtara", Kaduy, Vologda region

- Engineering and technological maintenance and repair of technological equipment.

 

OJSC Zelenodolsk FK (Plywood 10), Zelenodolsk, Republic of Tatarstan

- Commissioning of the SRG-25 drying chamber;

- Commissioning of the TGSG-2 heat source.

 

JSC “ Kaluga plywood plant”, Kaluga

- Installation of SRG-25 drying chambers to work with the heat source TGSG-2;

- Installation PSRG-10 boot mechanism with a lifting table and hydraulic station;

- Installation PRSG-10 unloading mechanism with a lifting table and hydraulic station;

- Installation of the heat generator mod. TGSG – 2;

- Installation of ducts from the heat source to the SRG-25 roll dryer up to 60 m;

- Installation of ash-handling systems with a service platform and spark removal system.

All the equipment produced by JSC "Proletarskaya Svoboda".

 

LLC "Trading House "Lestorg" in Pikalyovo, Leningrad region

- Installation and commissioning of sawmill equipment "Kara" (Finland);

- Installation of six drying chambers for timber products;

- Troubleshooting and restoration of the debarking machine, VK 26 (Finland);

- Design, manufacture and installation of service platforms for sawmill equipment;

- Installation of aspiration systems AO-1 for the lumber shop.

 

JSC "Arkhangelsk plywood factory" Novodvinsk of the Arkhangelsk region

- Installation and adjustment of Raute raw veneer peeling line in mechanics, electrics, hydraulics, pneumatics, gauges automation;

- Installation and adjustment of Raute 2 raw materials preparation lines in mechanics, electrics, hydraulics, pneumatics, gauges automation (debarking machines, auxiliary equipment, including a pendulum saw);

- Commissioning of Raute peeling line, raw veneer cutting and laying line and 2- lines of preparation of raw materials.

 

LLC "Sotameko plus", Sokol, Vologda region

- Elongation of the conveyor of removal of the pencil;

- Design development, manufacturing and installation of log conveyor;

- Design development, manufacturing and installation of service platforms 2HV-66 peeling line and central loading device;

- Design development, manufacturing and installation of the bark removal conveyor;

- Design development, manufacturing and installation of the building berth for 2HV-66 peeling line and central loading device feeding to the installation area;

- Peeling line installation preparatory works;

- Installation of Raute 2HV-66 peeling line;

- Installation of central loading device;

- Installation of hydraulic station and hydraulic routing;

- Installation and commissioning of the Proletarskaya SvobodaSRG-25 drying chamber.

 

JSC "Severtara", Kaduy, Vologda region

- Installation of "Hashimoto denki co., Ltd" edge gluing machine;

- Disassembling of the polymeric materials shop technological equipment;

- Manufacturing and installation of steel constructions for the crane in the finished product shop;

- Repair works of the LU 17-10 peeling line.

 

2004

 

JSC "Jarkowsky WWP", Jarkowsky, Tver region

- Installation and commissioning works of mechanical and electrical parts of Proletarskaya Svoboda technological equipment (drying chamber of the SRG - 25M).

 

JSC "Severtara", Kaduy, Vologda region

- Major overhaul of SUR-4 drying chamber with 4 hot sections additional installation;

- Installation of two P-714B presses with loading and unloading mechanization;

- Installation of SRG-25 drying chambers to work with the heat source TGSG-2 (production of JSC "Proletarskaya Svoboda");

- Installation PSRG-10 boot mechanism with a lifting table and hydraulic station;

- Installation PRSG-10 unloading mechanism with a lifting table and hydraulic station;

- Installation of the heat generator TGSG – 2 with pipe up to 20 m and a length of flues up to 15 meters;

- Installation of the veneer repair machine PSH-2AM;

- Installation of the TSZU 17-10 centering-loading device;

- Installation of LU 17-10 peeling line;

- Engineering, technological maintenance and repair of technological equipment.

 

Chudovo, Novgorod region, plant of CJSC "Chudovo - RWS"

- Disassembling of the old line sorting of wood veneer with preservation of components;

- Installation of Raute veneer sorting line for 9 pockets;

- Manufacturing and installation of veneer sorting line metal structures of service platforms for 9 pockets.

 

OJSC Zelenodolsk FC (Plywood 10), Zelenodolsk, Republic of Tatarstan

- Installation of SRG-25drying chambers;

- Installation of the loading mechanism PSRG-10 with lift tables and hydraulic;

- Installation of unloading mechanism of PrSRG-10 with a lifting table and hydraulic;

- Installation of the heat source TGSG-2;

- Installation of the DN-17;

- Installation of flues, L – 60 m.

All equipment produced by JSC "Proletarskaya Svoboda".

 

CJSC "Cherepovets plywood-furniture combinat", Cherepovets, Vologda region

- Works on design development, manufacturing of the heat generator TG-2, the ducts to the SRG-25M drying chamber of the and metal structures for heat generator and flues;

- Installation and commissioning of the heat generator TG-2;

- The project of gas supply of the heat generator TG-2;

- Installation and commissioning of the Proletarskaya SvobodaSRG-25 drying chamber.

 

JSC “ Kaluga plywood plant”, Kaluga

- Chef-repair and commissioning of the LU 17-10 peeling line mechanical part, installation of the SRG-25 drying chamber to work with the TGSG-2heat source;

- Installation of PSRG-10 boot mechanism with a lifting table and hydraulic station;

- Installation of PRSG-10 unloading mechanism with a lifting table and hydraulic station;

- Installation of the heat generator mod. TGSG – 2;

- Installation of ducts from the heat source to the SRG-25 roll dryer up to 60 m

- Installation of ash-handling systems with a service platform and spark removal system.

All the equipment produced by JSC "Proletarskaya Svoboda".

 

LLC "Trading House "Lestorg" in Pikalyovo, Leningrad region

- Installation and commissioning of "Kara" (Finland) sawmill equipment;

- Installation of six drying chambers for timber products.

 

2003

 

Chudovo, Novgorod region, plant of CJSC "Chudovo - RWS"

The plant for production of thin veneer sheets for furniture:

- Installation of technological equipment of the "Raute" company;

- Manufacturing and installation of service platforms for technological equipment.

 

Nyagan, Khanty-Mansi AO, Tyumen oblast, plant of JSC "LVL-Ugra"

Plant for the production of laminated veneer lumber:

- Installation of a full range of Raute technological equipment.

 

Uralsky village, Perm region, JSC "Permsky plywood factory"

A plant to produce large-sized plywood.

Installation of technological equipment:

- Veneer drying and sorting line

- Peeling, cutting and stacking line with log feeding conveyor;

- Building packages, pre-pressing and gluing;

- Manufacturing and installation of service platforms for Raute technological equipment;

- Installation of pipeline for thermo-oil.

 

LLC "Smolensk plywood", Igrevskaya st., Holm-Zhirkovsky district, Smolensk region

- Revision, repair and adjustment of hydraulic of LU17-10 peeling line;

- Installation and commissioning of new LU17-10 peeling line;

 

Thank you! Our manager will contact you.

Thank you! Our manager will contact you.